Menu

Login

New to Audio Assemble?

Register

Already have an account?

Best 1200 Watt Amplifier: Review & Buying Guide

If you are looking for the best 1200 watt amp this guide is for you. Today we are looking at a range of car amplifiers with a maximum power output of 1200 watt. This is a good range for most cars and will be enough to power 4 or 5 relatively loudspeakers. 

1200 watt amps are a great choice, because their power output can provide good volume, but doesn’t require an excess of power which can drain your car battery. 

In this article, we look at the best amps in the category and review their features and specifications. By the end of the article, you will have a good understanding of the types of 1200 watt amps available, and which one is the best pick for your setup. 

Keep reading for our full review of the best 1200 watt amps. 

Otherwise, check out these other car audio-related posts. 

Table of Content

7 Best 1200 Watt Amplifier Tried and Tested

1. Skar Audio RP-1200.1D Monoblock Class D

Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier

Overview

The RP-1200 is a monoblock power amplifier that delivers up to 1200 watts of clean, reliable energy. This is a 2-Channel, 1200 Watts RMS Class A/B Car Amplifier with Remote Subwoofer Level Control. Skar Audio uses a rugged, high-temp aluminum housing and many automotive grade components to ensure the amp’s reliability in any climate. 

The MOSFET power supply and unique “Ultra Hi-Density” circuit boards are highly efficient and eliminate traditional amplifier failure points. This amplifier is perfect for powering mid-range car speakers. 

Skar Audio Amplifiers are designed to provide the widest range of sound and power compared to any other amplifier on the market. These amplifiers are made with a new cutting-edge chip that provides lightning-fast speed and massive amounts of power output. Skar Audio amplifiers will provide you with rock-solid, long-term reliability in any weather condition or location!

Key Specs

  • Class – D
  • Max Output – 1200
  • Channels – Mono or Stereo

Pros and Cons

  • Easy installation
  • High to low adapter
  • Low Pass crossover filter
  • Low-Level RCA Inputs
  • All the controls you need

Summary

Whether you want to bump bass, shake the ground, or make the sky rumble, this amp’s got you covered. With a peak of 1,600 watts and an RMS power of 1,200 watts at 1-ohm load, it’ll easily deliver clean volumes of incredible subs from 20Hz all the way up to 250. The clean design and super slim body are a sign that this is a classic amp. You can easily install it too, as it comes with the wiring kits, mounting screws, and user manual packaged with the amp. 

– – –

2. No products found.

No products found.

Overview

This multi-channel amp has everything you need to play your music louder and better than ever through your car audio setup.

Whether you’re looking for crystal clear sound or a punchy bass, the PL12 will do all the heavy lifting. It’s got a variable bass boost and low noise so you can crank it up without the hiss. You’ll also love its variable filter which lets you tune your sound to perfection.

The Planet Audio PL12 Class D car amplifier offers 1200 watts max power at 12 volts (RMS), and has a compact and lightweight design, and blue backlit illumination. This product has all the qualities to bring your system to life.

The Planet Audio PL1200.2 is a 1200 watt Class-D monoblock amplifier with remote subwoofer control. With the high-level input plug, you can connect your audio source to the amplifier without having to change any wiring. The amp features two sets of speaker outputs that are wired in parallel, meaning you can use up to four sets of speakers at the same time. 

The PL12 is a powerful, 2-channel amplifier that’s capable of delivering up to 500 watts RMS and will fit in any vehicle. This amp’s small footprint and custom installation kit make it easy to get big subs in any car.

The PL12 is the perfect amp for those who want to go all out when it comes to sound. This high-powered amp has a variety of features that allow you to fully customize your sound. With a full range Class A/B design and the ability to bridge two channels, this amp is the ideal choice for powering your car’s speakers.

Key Specs

  • Class – AB
  • Max Output – 1200
  • Channels –  2

Pros and Cons

  • Includes SUbsonic Filters and Variable Low pass
  • Decent Performance
  • Aluminum heat sink reduces keeps cool
  • Can be bridged

Summary

The PL12, a compact and powerful amp that’s perfect for automobiles. When you’re on the go, there’s nothing better than listening to your favorite tunes on a reliable deck like the PL12. So if you’re looking for an affordable amp with advanced features that deliver, the PL12 is your answer.

– – –

3. No products found.

No products found.

Overview

BOSS Audio is a well-known manufacturer of car audio equipment and home audio equipment. They pride themselves on delivering high-quality products that are both affordable and reliable. 

This R600 amp is perfect for anyone looking to add more oomph to their vehicle’s sound system. With 600 watts of max power, this amp will power any speakers you can put in front of it!

The R600 is an all-in-one amplifier for your car audio system. This high output power amplifier delivers 600 watts of continuous power and peak power of 2400 watts. 

With the Variable Input Gain Control, you can adjust your input gain to match the output of your factory receiver for better sound quality. With this amplifier, you’re sure to get the powerful performance and sound quality you’ve been looking for.

Rock out with this 600W max amplifier for sound so clear, you’ll feel like you’re at a concert. It’s the only amp you need if you have a high-power subwoofer system, or just want to blow other cars out of the water.

This powerful amp will fill your vehicle with a sound that’s crystal clear and distortion-free for a glorious driving experience on and off the road. Featuring a sleek design, this amplifier is ready to take you on your next great adventure

Key Specs

  • Class – AB
  • Max Output – 1200
  • Channels – Monoblock

Pros and Cons

  • Affordable
  • High quality sound
  • Good subsonic filters 
  • Both high level and low-level inputs
  • Colder than many other amplifiers. 

Summary

The BOSS Audio R600 is the perfect amp for a sleek & loud setup. With low and high-level inputs, it will be compatible with most newer car radios. You can also amplify your rear speakers to enjoy a surround sound experience. This amp has enough power to get your system bumping!

The new BOSS Audio R600 is here to shake up the car audio world! Get ready for earth-shattering bass, noiseless signal flow, and incredible power efficiency!

– – –

4. No products found.

No products found.

Power your sound system with the Fosgate R2-1200X1 full-range class-D mono amplifier. This powerful 1200 Watt amplifier is perfect for all of your 12 Volt applications and features full RMS power and bass. The low-profile design means it’s easy to install in tight spaces and it’s built to last.

With 1200 Watts of output, this amp will push your music to the limit! It also has a built-in Bluetooth connection so you can have hands-free calling while driving without any additional wiring needed. Perfect for any car audio system, this amp is the best addition to your vehicle and will help you get to where you want to go.

A clean power supply and integrated Punch EQ all come together for a bass-boosting journey that’s so amazingly clean, you can’t help but feel it in

Rock out with a Fosgate R2-1200X amp. This powerful car amp is perfect for subwoofers and comes with a variable infrasonic filter and remote control level. Give your music the bass it deserves!

Key Specs

  • Class – D
  • Max Output – 1200
  • Channels – Mono

Pros and Cons

  • Affordable
  • Good level inputs
  • Easy to install
  • Great amp for beginners

Summary

It’s time to turn up the volume! This amp is one of our top sellers and is perfect for those who want to push their system to the limit. It provides a clean, powerful sound and can drive your subwoofers with ease. The R2-1200X1 also has a fully adjustable crossover filter so you’re only amplifying the sound you want.

– – –

5. No products found.

No products found.

The BXX1200.1D is the newest addition to Hifonics’s competition series car amps. This is a high-grade 1200 watt amplifier with class D Super technology and NGSD digital chip technology aiming to give you the best quality and efficiency.

The Hifonics BXX1200.1D is a 1200 watt mono amplifier with Super Class D technology. It features an extremely efficient and low-temperature high-amplification system, that others only dream about. The amp has a variable high pass and low pass crossover (40 – 400 Hz), bass boost, and remote bass level adjustment and is Class D which minimizes the amp’s

The Hifonics BXX1200 is a quality 1200 watt monoblock car amp that features high-grade power supplies, thermal protection, and much more to ensure you’re providing your car the best listening experience possible. The amplifier’s protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer. This amplifier has six RCA inputs for external signal sources and two pairs of

Building a better-looking, better-sounding and more powerful system for your car or truck ain’t easy, but Hifonics has got you covered. The BXX1200 is an all-in-one car amplifier that will exceed the power levels of anything you’ve tried before. It’s built with the latest technology that’s tough enough to withstand vibrations and heat, making it perfect for life on the road. Designed for 4 channel systems

Key Specs

  • Class – D
  • Max Output – 1200
  • Channels –  Mono

Summary

Broadcasting your music to the world has never been easier. Hifonics BXX1200 is the perfect amp for car audio systems, with its low-power draw and great sound. Whether you’re on the streets or on the road, you’ll always be heard with this sweet sound machine from Hifonics!

– – –

6. No products found.

No products found.

Overview

The Kicker CX 1200.1 Amp is the perfect solution for you if you’re looking for serious bass performance and a sleek look at an affordable price. This amplifier features a variable bass boost with KickEQ, giving you up to 12 dBs of extra bump with a simple turn of the dial.

The CX1200 is the ideal amp for those who demand the most from their car audio system. This 2-channel class D car amp features Kicker’s Advanced Rollback Protection, which protects your equipment from being overdriven by limiting power on demand and provides a thermal protection circuit to keep your amplifier cool. With 1000 watts RMS into 4 ohms, and combined with the optional

This is a powerful, bass-driven processor. It offers 1200 watts of clean power and is equipped with a remote bass control to achieve the perfect sound in any car. Its MP3/AUX input, auto-detecting turn-on and LED display will keep you entertained for years to come.

This car amp delivers the power and sound quality you need for all your audio needs. Connect this 1200 watts amp to your favorite components for a massive upgrade in sound. Unique features like Active Crossover, Subsonic Filter, and KickEQ Boost make this car amp the perfect combo with any audio system.

Key Specs

  • Class -D
  • Max Output – 1200
  • Channels –  mono

Pros and Cons

  • Ideal for bass
  • Expensive

Summary

Looking for a reliable amp that won’t break the bank? Kicker’s CX1200 is your solution. This amp is powerful and has a small footprint, so it’ll fit in the tightest spaces. With features like an optional CXRC Remote Bass Controller, a powerful 12dB crossover, and a 24dB subsonic filter, this amp delivers as much as 1200 watts into one channel.

– – –

7. No products found.

No products found.

Introducing Taramps Bass 1200 Digital Amplifier Module, the perfect amplifier for your mid-range system with one or two subwoofers. This powerful amp pumps out up to 1200 Watts RMS and can aid in producing a satisfying bass response from your car that you were hoping for.

Taramps bass amps are quality bass amplifiers that have been designed to give you the best possible sound. With a variable crossover high pass (HPF) and low pass (LPF), this amp has your needs covered. The HPF cuts of frequencies at 8Hz and the LPF cuts of frequencies at 60Hz. This amp also has a parametric bass boost of 35Hz to 60Hz, with a max boost of 12dB.

Summary

Looking for a reasonably-priced, high-quality solution for your car amplifier needs? You’ve found it with Taramps. This 1200watt, one-channel amp has plenty of power for a single 12″ subwoofer. With an input sensitivity of 320mV and a signal-to-noise ratio at 90dB, to get the most out of it you’ll need an amplifier remote with gain control.

Buying Guide: What to look for in a 2000 watt amp?

Best 1200 Watt Amplifier

Power

When choosing a new car amplifier, it’s important to find one with the right max power output for your speakers. The actual power output maybe a little lower than the specified wattage, but this is a safety precaution. Remember there is a difference between the RMS power output and peak. 

Connections

You should make sure the speaker has all the required inputs and outputs. Speaker level inputs are important and help to transfer speaker level signals. Most come with RCA outputs that are easily connected to speakers with the right wiring kit. Many people think connecting an amp is a daunting task, however, it is actually relatively easy and can be achieved in a short amount of time. 

Channel Count

Getting an amp with the right number of output channels is essential. You need an amp that has enough outputs to power all the speakers in your car. For most people, a 2 channel amp is enough, however, if you want more speakers, or an extra subwoofer then you will need something with more room. A 5 channel amp is enough to power 4 normal speakers and a sub, this is my favorite kind of setup. A mono amp is fine if you want stable performance for one speaker. 

Controls

Each amp has a different set of features and controls. To get the best tone for your car it’s a good idea to choose something that has a range of tuning settings. I would recommend going for a variable low pass filter, so you can tune the bass. Also, a low pass crossover filter is important as it helps balance the speakers. Besides a low pass filter, most amplifiers have controls for the level inputs and speaker level, so you can get the right gain staging. 

Class

The amplifier’s class is also essential since it determines how energy efficient the amplifier is. Class D amplifiers use less energy but have worse audio quality, whereas class AB amplifiers use more energy but have greater audio quality. The trade-off is purely a question of personal preference, but it is a crucial factor to consider when it comes to properly power the amp.

Amplifiers come in a variety of shapes and sizes. The categories are based on the amount of power efficiency and the quality of the audio. In comparison to class D amplifiers, class A amplifiers need more energy but provide a cleaner, louder, and more detailed tone.

FAQs

What amp is needed for a 1200 watt sub?

This question can be answered in a few different ways. The first answer is to look at the ratings on the subwoofer. This will give you the RMS power that the subwoofer is capable of handling. The second answer is to look at how many speakers are wired to the amplifier and then find out how much power is needed for each one.

How many amps does a 1200 watt amplifier?

This is a question that has been asked by many people. It is important to know how many amps a 1200 watt amplifier draws because it will help you figure out the necessary wiring for your amp. 

To work out this, you will find the amp draw information on the product specifications page. 

Wrapping Up

This concludes the review. You should now have a strong idea of the range of 1200 watt amplifiers you can find for your car today. All of the above amps come highly recommended if you are looking for a new amp. I’d recommend choosing one with a variable bass boost, and optional bass level remote, this makes it easier to boost your speaker on the go. A variable low pass filter is also recommended since it helps to get a better balance of low, mid, and high frequencies.  

See these related reviews –