New to Audio Assemble?


Already have an account?

8 Best Car Amps for Bass – Reviews and Buying Guide

Car amps are an important part of your vehicle’s sound system. To get the best sound from your car you need to pick the right kind of amp and speakers. This guide outlines a range of the best car amps for bass. We’ve searched across the market to bring you this list of our top recommendations. 

If you’re looking for a bassy car amp, then you’ve come to the right place.

In the second half of this guide, we share details and tips on how to choose the best amp for your car too. This will help you to determine which kind of amp is most appropriate for your needs. 

Keep reading for our full review of the best car amps for bass!

Alternatively, check our post about the best headphone amp.

Table of Contents

8 Best Car Amps for Bass in 2022

1. Kicker 46CXA8001

Kicker 46CXA8001

This amp is specifically for powering subwoofers. 

It features a few extra controls for getting it to blend perfectly with your other speakers. The crossover controls come with 12dB variance, allowing for a fairly tight crossing. It also comes with a bass boosting control that provides up to 6dB extra bass gain. It features a built-in subsonic filter to remove potentially damaging frequencies before they reach your speakers. 

This is a relatively nice, albeit very high-quality product. This is more of an additional, or extension amplifier rather than a central unit, as it does not provide enough connections or controls to run a full rig. Use this in combination with another amp to maximize your control over the subwoofer in your car. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 1600W
  • Inputs – 1 x RCA
  • Output Channels – 1 x RCA out, Speaker terminals
  • Controls – Vol, Gain, Crossover, Bass Boost

Pros and Cons

  • High-quality subwoofer amp
  • Excellent Bass response
  • Limited connectivity


This Kicker device offers high-performance audio and specific controls to provide amplification which will blow your socks off. This is definitely not to be used as a main amp, but if you need an extra amp to control your bass speakers, this is a great choice. If you pair this with a decent subwoofer speaker then you are guaranteed to be in charge of some seriously heavy bass!

– – –

2. No products found.

No products found.

This range of car amps from Skar Audio offer excellent quality and functionality at an affordable price. There is a huge range of amps in this series, covering pretty much every wattage and class under the sun. So you can be assured there is an amp in this range that suits your needs. 

This Is a Class D Mosfet amp featuring two output channels and a single input. It comes with a few controls and settings for fine-tuning, including gain control, a bass EQ switch, an LPF knob, and a Subsonic control.

This speaker is ideal for sculpting the bass section of your car’s sound system. I highly recommend using this with a pair of bass-weighted speakers or subs. The boosting circuitry of this amp targets 45Hz, which is a key zone for sub-bass power. This amp also features a super-efficient heat sink and energy draw, making it safe and more power-efficient than many other models. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 800W
  • Inputs – 1 x RCA
  • Output Channels – 2 x Stereo speaker terminals
  • Controls –  Gain, LPF, Sub, Bass EQ
  • Frequency Response – 20Hz – 250Hz

Pros and Cons

  • Excellent control over bass frequencies
  • High-quality sound
  • Efficient, safe, and durable
  • Not a full-range amp
  • Limited frequency response (no upper Hz)


Skar Audio RP-800 is a cracking series of car amplifiers. These are easy to install and operate and provide a fantastic level of control over your low end. If you are looking for an affordable amp that lets you design your Soundsystem’s frequency response in detail, you will find something in this range. This is a Class D amp, so whilst the quality is relatively limited, it´s much more power-efficient than Class A/B models. 

– – –

3. Audiopipe APMI-1300

Audiopipe APMI-1300

The AudioPipe APMI-1300 is a fantastic budget car amp with a bass knob, and bridged input. 

Whilst being affordable, this amp offers a great range of features and controls and has a high level of tunability. The main attraction of this amp is the full selection of knobs.

It includes a standard master gain, an LPF between 40 and 180 Hz for fine-tuning the mid-range content, it has a subsonic audio level control. It also features a bass boosting EQ circuit, with separate controls for frequency and decibels, you can boost anywhere between 30 and 80Hz, with up to 12dB of gain. This amp can really give you a serious amount of bass power.

It does have a relatively limited amount of connections, with only a single stereo input and two outputs, although it is enough for most people. The general sound quality isn’t anything to write home about, but it does the job. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 1000W
  • Inputs – 1 x RCA + Bridged RCA
  • Output Channels – 2 x Speaker terminals (Stereo)
  • Controls – Gain, LPF, Sub Control, Bass Boost (Frequency and Gain). 
  • Frequency Response –  30Hz – 180Hz

Pros and Cons

  • High level of customization
  • Bridged Input
  • Efficient with power
  • Limited connections
  • Average sound quality. 


The AudioPipe is another great entry level car amplifier. This one has a few more features and customization options over the others, so you will be able to achieve a cleaner blend between the low and mid frequencies. The fact this provides a variable bass boost is a huge attraction and lets this create more bass energy than others in the list. Although the boosting is a little artificially, and wooly sounding. 

– – –

4. No products found.

No products found.

This Hifonics amplifier offers a greater level of customization than most on this list. It features an extensive set of controls that are suitable for tweaking your sound to near perfection. This is a great amp for people with more interest in sound quality and acoustics and provides clean and accurate amplification with minimal noise.

This amp is super efficient with power usage and has an effective cooling system to minimize heat risks. The Frequency range of this amp is decent too and extends as low as 10Hz which is much lower than most speakers go. It also goes up to around 500Hz, so you get a little extra warmth and mid-range. 

The controls on this amp are fantastic, and it offers everything you need to accurately sculpt the sound. The parametric bass EQ and subsonic controls let you dial in the exact amount of bass you desire. This amp also features a remote control terminal, so you can connect it to other car audio gear. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 2200W
  • Inputs – 1/4¨ Hi/low 
  • Output Channels – 2 x Stereo Speaker
  • Controls – Low Pass Filter, Subsonic Level, Phase, Parametric Bass EQ, Master Voltage Level
  • Frequency Response –  10 Hz to 500 Hz
  • Extra Features -Ultra-Fi Mosfets for super high power

Pros and Cons

  • American Made
  • Wide range of controls
  • Fantastic sound
  • Decent Connectivity
  • Relatively Pricey


This Hifonics system is a decent amp from a reputable brand. It sounds fantastic, it’s super tuneable, and highly power efficient. There really isn’t much to criticize here. This amp is more suited to sub-use and doesn´t have the full frequency range of outputs to be used as the main amplifier. Although this is one of the better sub-controllers out there. 

– – –

5. Taramps Bass 5k

Taramps Bass 5k

This Taramp Bass amp is a true beast, with up to 5K of wattage, this is the most powerful amp on this list. This amp definitely has the potential to go louder than any other here, provided you have the speakers to match. 

This amp also features a decent amount of control and modification. The controls provided let you shape the speaker output very well, and offer variable controls for boosting or filtering the bass. 

This amp uses a single stereo RCA input to connect to the source, so it can be plugged into most setups. This is another Sub based amp and doesn’t have a full range of outputs. However, if you want something to power a massive subwoofer, this is definitely the piece. This can drive massive speakers and is probably too powerful for many use cases. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 5000W
  • Inputs – 1 x RCA
  • Output Channels – Stereo Speakers or Sub
  • Controls – Level, Sub, Crossover, LPF, Bass Boost
  • Frequency Response –  8Hz to 250Hz
  • Extra Features – Remote Control

Pros and Cons

  • Super High Wattage
  • Maximum volume potential
  • Great crossover and controls
  • High Price
  • High Power Use


This amp is a high-end choice for people with a bit more cash in the bank. If you want maximum bass and aren’t willing to compromise on huge volume, this is a great pick. It won’t be for everyone and is probably too powerful and loud for many situations. But if you need something capable of producing some serious low end, look at this 5K, super-powered device.

– – –

6. No products found.

No products found.

Another high-powered but affordable mono subwoofer amp, this Hifonics unit sacrifices no quality and offers a great range of features and tones. This is another Class D amp, so it offers a relatively decent sound with the bonus of less power draw. 

This amp provides all the controls you need for tuning. It even features a phase control which is relatively rare and lets you avoid any phase cancellation to get a maximum bass response. The EQ and sub crossover are well-calibrated and help to get your subsystem to match your other speakers. 

The frequency response of this amp is great too and has a bottom limit of 10Hz, which is very low, meaning you can get some super fat subs from this. (If you have the speakers to match.)

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 2000W
  • Inputs – 1 x RCA Input
  • Output Channels – Stereo Speaker out, RCA Out.
  • Controls – Level, Phase, Bass EQ, Sub Crossover, LPF
  • Frequency Response – 10 – 250 Hz 
  • Extra Features – HFR-31 Remote

Pros and Cons

  • Extended range of controls
  • Super low frequency response
  • High-quality sound
  • Remote control
  • Gets a bit hot


This is another fantastic amp from Hifonics. This is a little more expensive than some of their other models but offers an extended range of controls and deeper bass. 

– – –

7. No products found.

No products found.

This is another fantastic monoblock amplifier from SoundQubed. 

This model is towards the pricier end of the spectrum but compensates with higher sound quality and a conscious design. It features a few controls for fine-tuning, although it lacks a bass boost. This could be a bonus though because some bass boosts end up sounding distorted. 

It’s all around a good pick, although the protection circuit often kicks in too easily when you crank it, which can interfere with the playback a little. If you’re careful and set it up right then there shouldn’t be an issue. 

Product Specification

  • Amp Class – Class D
  • Peak Wattage – 2250
  • Inputs – 1 x RCA
  • Output Channels – Stereo Speaker
  • Controls – Gain, Sub Crossover, LPF
  • Frequency Response – 10Hz – 200Hz
  • Extra Features – Removable volume control

Pros and Cons

  • Low signal to noise ratio
  • Decent Thermal Projection
  • Adjustable Filters
  • Distortion-Free
  • Lacks Bass boost
  • Interfering Protection circuit


A great choice for people who want something that sounds great, but isn’t complex or cluttered. This thing is effective with its power usage and keeps cool too. Recommended for anyone needing a quality sub amp for their car. 

– – –

8. YaeCCC 1Sub woofer Board 12V

YaeCCC 1Sub woofer Board 12V

This amp comes in a slightly different enclosure style to the others, favoring a board-style design rather than a block. This makes the amp useful for mounting in your car in slightly different ways. 

This simple sub-controller is a cheap but effective solution for using a subwoofer in your car. Use this as an expansion unit for another amplifier and you’re in for some fat bass. 

This unit is super low cost, so don’t expect fantastic results, but if you need a sub amp on a budget, this is as affordable as it comes. Whilst being very cheap, it still offers a few important controls like LPF, and a phase switch. So you can still get a good sound. 

The body of the unit is also designed for maximum durability and heat dissipation. 

Product Specification

  • Amp Class – Class A
  • Peak Wattage – 1000W
  • Inputs – 1 x Stereo RCA
  • Output Channels – 1
  • Controls – Volume, LPF, Phase switch
  • Frequency Response – 28-160Hz
  • Extra Features – Board style design

Pros and Cons

  • Super Low Cost
  • Decent Controls
  • Easy Mounting
  • Mediocre sound quality
  • Limited functionality


This is the king of budget car bass amps. Ok, it’s far from high quality, but if you’re on a tight budget this definitely gets the job done. It won’t blow you away, but it still has a decent frequency response and can crank your subwoofer fairly loud. 

– – –

How to Choose the right car amps for bass?

When choosing a car amp there are several things to consider. If you want to maximize your car’s bass, then check these factors.

Frequency Response

One of the most important specifications when it comes to making a bassy sound system is the frequency response. If you want bass-heavy speakers in your car then make sure you choose an amp with a wide frequency range. You want to make sure your amplifier can handle it low frequencies well. As a rule of thumb, you should go for an amplifier that has a minimum frequency range of around 20Hz. This means the amp is capable of producing the low sub frequencies that are so important for loud bass. 

Subwoofer Output

One of the best ways to get better bass in your car is by using a subwoofer speaker. (Check out our guide on the best under-seat subwoofers). If you pair a subwoofer with the standard speakers, you are almost guaranteed a fat bass tone. 

Some car amps come with an extra output channel dedicated to connecting to a subwoofer. If you plan on using a sub in your car then make sure you choose an amp that has a subwoofer output. 

Power Handling

The power handling of your amp dictates how loud it can go, and the size of the speakers it can power. Generally bigger speakers result in louder, more powerful bass frequencies. If you want to get the most bass from your car as possible, then I suggest going for an amp that has a high level of output. That being said you need to make sure the speakers you use with the amp can handle the level of power you are providing. 

Extra Features

Some amps come with extra features and controls that can sometimes help with bass. Many high-end amplifiers come with a set of equalization controls. These let the user tweak and fine-tune the sound of their setup. Amps with an EQ often let you boost the bass more, giving you a bit extra volume down below. Some even come with a specific bass boost switch or control, so keep an eye out for those features if you think you’ll use them.

You may also want additional controls over the volumes of each speaker. Some amps simply use a single master volume for the whole array. Other amps let you control the individual levels of each speaker, enabling you to customize your speaker setup more. 


You should also think about how you plan on connecting the amp to the speakers, and the input source. There are two areas to think about in terms of connections – what you plan on using as the audio source, and how many speakers you plan to connect.

Most car amplifiers have inputs that are compatible with modern phones, car radios, and sometimes even Bluetooth. They use wired terminals for connecting the speakers. Different amps have a varied range of speaker outputs, so make sure you choose a model that has enough to use with your intended number. 4 speaker outputs are generally a good place to start.  


Not so much related to bass, but you should consider the type of installation required by the amp. Some amps are much easier to install than others. 

Amp Class

Another important consideration is the class of amplification. Cass A/B amps are less power efficient but offer significantly improved audio quality. They can create a much louder, more powerful sound but also require a much larger power source. 

Class D amps are the reverse, they use much less power but offer a diminished audio quality.

Typically A/B amps are favored in subwoofer situations, thanks to their large energy, although in recent years the Class D amps have become more popular for this use.

Class D amps offer much higher power efficiency and are slowly becoming better designed over time. Because bass frequencies rely more on power than quality, these can be a pretty good choice for increasing bass at a low cost or low power situation.

Class D amps generally have a slightly noisier signal than class A/B amps though, which may be an unwanted issue for some people.

Also Read:

How to Select the Best Amplifier for a Car

There are a few steps to take to help you choose the best amp for your car. Follow this checklist to get the right one.

  • Work out how many speakers you plan on connecting. Whether you only need two channels, or if you need four. You may even want something that has extra outputs for a subwoofer
  • Determine the power requirements of your speakers. If you already have the speakers you plan on using, check their power requirements. This should be fairly easy to find out.
  • Connections – work out what connections you plan to use, and search accordingly.  
  • Power requirements. The amp also needs a certain amount of power to function. Check your car can provide this level.


Does a Car Amp Improve Bass?

They definitely can. It really depends on what the original setup was like, and what the features of the new amp are. Compared to not using an amp at all, an amp can provide a much-needed boost in volume, and even the option to boost the bass. Generally, a car amp can improve the bass, if it has good enough quality and a solid level of power.

Overall, upgrading your car amp can be a great way of achieving more bass, although you need to make sure the amp has the controls you need, and it might be worth upgrading your speakers at the same time for an even better sound. 

What is a good bass amp for a car?

Any of the amps on this list are recommended if you are looking for a bassy sound. These all have the power requirements and outputs you need for a good bass sound.

If I had to recommend one then I would say go for the Kicker. 

Does Higher Wattage Guarantee More Bass?

Not explicitly, although it can. Again, this really depends on the type of speakers you use, and the comparison against your previous amplifier. More wattage can definitely create more bass if the speakers can handle it. That being said, you need speakers that can accommodate the extra level of energy. 

Because larger wattages result in more energy, it has the potential to activate the speakers at a much higher level of volume. This can increase the bass response. Although, if the speakers have limited low frequency reproduction themselves, then adding an amp won’t extend that range. 

Final Thought

Thanks for reading! You should now have a good understanding of the range of amps you can use to boost the bass in your car. Remember, no matter how good your amp is, it won’t sound great unless you’ve got powerful speakers to match!

If you’re on the hunt for more car audio equipment, check out our review of the best under seat subwoofers!